• 209-337-5705

4 Tips Help You Ensure Inhaler Service Success

Often a nurse or medical assistant helps a patient with an inhaler demo or evaluation, but whenever coding it, you must keep these three areas in mind: the type of device used, documentation requirements, and qualifying modifiers. Follow these four tips from our experts to understand why some payers might deny payment for the service — and what you can do to win deserved dollars.

1. Categorize the Diskus Correctly

Many physician offices use the Advair Diskus for their patients, which is an aerosol generator. “An aerosol generator is a device that produces airborne suspensions of small particles for inhalation therapy,” explains Peter Koukounas, owner of Hippocratic Solutions medical billing service in Fairfield, N.J. If the nurse or medical assistant taught someone to use an Advair Diskus — or any other diskus — you should report 94664 (Demonstration and/or evaluation of patient utilization of an aerosol generator, nebulizer, metered dose inhaler or IPPB device).

The physician starts a patient with asthma (493.00, Extrinsic asthma; unspecified or 493.20, Chronic obstructive asthma; unspecified) on Advair. A nurse then teaches the patient how to use the Diskus. According to CPT guidelines, you should report 99201-99215 for the office visit (depending on whether you’re treating a new or established patient). Then report 94664, but don’t append a modifier, says Alan L. Plummer, MD, professor of medicine, Division of Pulmonary, Allergy, and Critical Care at Emory University School of Medicine in Atlanta.

CMS transmittal R954CP indicates that modifier 25 (Significant, separately identifiable E/M service by the same physician on the same day of the procedure or other service) applies only to E/M services performed with procedures that have a global fee period. Code 94664 does not have a global fee period, which is why you don’t automatically include modifier 25.

Despite what CMS guidelines might…

Read More »

Modifiers 52 or 53? Prevent Denials By Making The Correct Choice

If you mistake modifiers 52 and 53 as one or the other because they’re both used for incomplete procedures, you’ll end up losing your reimbursement. Remember these two have extremely distinctive functions.

Consider a situation when the gastroenterologist performs an esophagogastroduodenoscopy (EGD) to examine the lining of the esophagus, stomach, and upper duodenum of a patient as part of a GERD evaluation.

Suppose that while inserting the endoscope, the patient registers unstable vital signs. The gastroenterologist, then, decides it is not in the patient’s best interest to continue the procedure. You would report this on your claim using:

  • 43235 (Upper gastrointestinal endoscopy including esophagus, stomach, and either the duodenum and/or jejunum as appropriate; diagnostic, with or without collection of specimen[s] by brushing or washing [separate procedure]) for the EDG
  • Modifier 53 (Discontinued procedure) to show that the GI discontinued the EGD.

Other situations that would call for a discontinued procedure include respiratory distress (786.09), hypoxia (799.02), irregular heart rhythm (427.9), and others usually related to the sedation medications.

Modifier 53 Defined: Under certain circumstances, the physician may elect to terminate a surgical or diagnostic procedure. Due to extenuating circumstances, or those that threaten the well-being of the patient, it may be necessary to indicate that a surgical or diagnostic procedure was started but discontinued.

In addition, you shouldn’t disregard the importance of submitting documentation that shows:

  • that the physician began the procedure;
  • why the procedure was discontinued;
  • the percentage of the procedure performed.

Taking on the same scenario, the gastroenterologist begins the diagnostic EGD but stopped without examining the entire upper gastrointestinal tract because she encounters an obstructing lesion in the middle of the stomach. In this case, you should attach modifier 52 to the CPT, says Margaret Lamb, RHIT, CPC, of Great Falls Clinic…

Read More »

GI Tract Reporting: When and When Not To Use 91110, 91111

While you know for sure that you can report 91110 and 91111 for capsule study, but knowing just that is not enough to prevent your claims from being denied. We’ll tell you just when it is appropriate to report them  and which modifiers to append.

Reporting a Repeat Procedure with 91110

Sometimes, your gastroenterologist would use a capsule study to image the intraluminal esophagus all the way through the ileum and reaching the colon. In this case, you should report 91110 (Gastrointestinal tract imaging, intraluminal [e.g., capsule endoscopy], esophagus through ileum, with physician interpretation and report).

Let’s take an example. Patient comes in for a capsule endoscopy, but the capsule gets stuck in foodon hour five and visuals cannot be seen past the stomach. The gastroenterologist ends up repeating the procedure to see if she can see the small and large intestine.

First, you would code 91110 and then attach modifier 53 (Discontinued procedure) to indicate that the physician repeated the procedure. If the physician decides not to repeat the procedure, you should append modifier 52 (Reduced services) to reflect that the capsule imaged the patient’s anatomy until it became lodged in the food.

If you plan on repeating a capsule study due to technical problems, it is a good idea to pre-authorize payment for the second study with the carrier. You may need to provide records of the incomplete study.

CPT 91110’s descriptor clearly states the evaluation is from the esophagus to the ileum. The only time this won’t be true is when the gastroenterologist places the pill cam endoscopically for the study, says Joel V. Brill, MD, AGAF, chief medical officer at Predictive Health LLC in Phoenix. Again in this case, you should attach modifier 52 to 91110.

Know What ‘SB’ and ‘ESO’ Mean on PillCam…

Read More »

Multi-Provider Coding: Modifier 62 Can Save You $4k

When you come face-to-face with multi-provider situation, the last thing you would want is to mess up your coding by assigning the wrong modifier(s).

Imagine a 70-year-old female patient presenting with COPD and coronary artery disease, status post myocardial infarction (CAD s/p MI) having a 28 mm of inner diameter thoracic aortic aneurysm. Imaging studies indicate the aneurysm to be descending. The cardiologist, together with a thoracic surgeon, decides to perform an open operative repair with graft replacement of the diseased segment.

The main key in a multi-provider scenario is to treat each physician’s work as a separate activity. However, deciding when to report a case as co-surgery, assistant surgery — or something else — has more to it than meets the eye. Find out what with this expert’s advice.

You know that a modifier is at hand in this case, but more importantly you should be able to tell what role each modifier plays in order for your procedure codes to blend well together. Here are the most common modifiers used in multi-provider situations:

  • Modifier 62 (Two surgeons). Append this to each surgeon’s procedure when the physicians perform distinct, separate portions of the same procedure. Also referred to as co-surgery, modifier 62 applies when the skill of two surgeons (usually of different skills) is required in the management of a specific surgical procedure.
  • Choose between modifier 80 (Assistant surgeon), modifier 81 (Minimum assistant surgeon), and modifier 82 (Assistant surgeon [when qualified resident surgeon not available]) when one surgeon assists the other with multiple portions of the case rather than completing his work independently. What to look for? Make sure your physician indicates in his documentation that he’s working with an assistant surgeon, what the assistant surgeon did, and why he or she was used during the case.
  • Attach modifier AS

…

Read More »

SuperCoder Claim Scrubber Will Verify Modifiers, ICD-9 Codes, and More

Physician and facility coders alike will benefit from SuperCoder’s newest tool!

Want to check if CPT and Medicare allow certain modifiers on a code combination, such as 69210-25 and 99213-59? In January, SuperCoder.com will offer a claims scrubber that will alert you to whether the codes on a claim require a modifier(s), the diagnoses indicate medical necessity, the gender is appropriate for the procedure(s), plus many additional denial combating warnings.
With SuperCoder’s Claim Scrubber add-on tool, you enter a claim’s CPT, ICD-9, and HCPCS code combinations and the tool instantly checks the codes for National Correct Coding Initiative (CCI) edits, diagnosis-CPT linkages, Medically Unlikely Edits (MUEs) or frequency allowances, and more. You can get results in real-time – or you can submit a batch file of claims and receive a detailed errors report in seconds.

Seven Reasons You Need This Tool

SuperCoder’s Claim Scrubber will save you time and money. The tool will:

1. Help physicians to submit only compliant claims
2. Reduce denials
3. Find missing charges
4. Optimize RVUs
5. Accelerate reimbursement cycle
6. Reduce submission costs
7. Produce real time results

To purchase the tool, go to www.supercoder.com/products/ You must already have a Codesets & Tools or Advantage subscription.

Bonus: SuperCoder’s Claim Scrubber will let you enter code combinations for both CMS-1500 and UB-04 claims.

Read More »

No Correct Coding Initiative Bundle? Find Modifier Details in MPFS.

Question: Sometimes I cannot find my two-code pair in the CCI edits. How do I know which code would be considered a column 1 code and which would be considered a column 2 code, so that I could put my modifier on the correct code?

Answer: If the codes are not listed, the codes are not bundled per the Correct Coding Initiative (CCI). You would not need a CCI modifier, such as 25 (Significant, separately identifiable evaluation and management service by the same physician on  the same day of the procedure or other service), 57 (Decision for surgery), or 59 (Distinct procedural service), to override the edit when appropriate.

A private payer could have a black box edit. You would need to check with a rep for a recommendation.

Watch out: Just because a code does not have a bundle in CCI does not mean a modifier is out of the picture. While you won’t need a CCI modifier to override the edit, you might need apayment modifier.

You can find Medicare’s other allowed modifiers for any given CPT code in the Medicare Physician Fee Schedule (MPFS). Columns Y-AC indicate if modifier 51 (Multiple procedure), 50 (Bilateral procedure), etc. apply.

To determine which code receives modifier 51, you need to know the code’s relative value units, which are also listed in the MPFS. Private payers may not adjust claim items in descending order as Medicare’s Outpatient Code Editor software does. If you append modifier 51 to a higher valued item, the private payer may apply the adjustment based on your coding, costing you payment. You should instead list the items in descending relative value order from highest to lowest. Append modifier 51 to the lower priced procedure as necessary. The insurer will then apply the typical 50 percent,…

Read More »

Modifier 58, 78, 79 Tips to Get Postop Surgery Paid Correctly

Don’t miss out on extra pay when global period resets.

Just because you routinely append modifiers to your claims doesn’t mean you’re filing correctly and getting the most appropriate pay. Brush up on your modifier know-how with these tips for three of the trickiest choices: modifiers 58, 78, and 79.

Selecting between these modifiers can be carrier-specific in some situations, says Jacqui Jones, office manager for Benjamin F. Balme, MD, PC in Klamath Falls, Ore.

Remember All Possible Uses for 58

The descriptor for modifier 58 seems self-explanatory: Staged or related procedure by the same physician during the postoperative period. Coders sometimes trip, however, when they forget that modifier 58 actually applies to subsequent procedures that fall into one of three categories:

Planned or anticipated (staged):  A good example might be an infected hand that has to be debrided several times over the course of a couple of weeks. You won’t use a modifier on the first procedure, but will add modifier 58 on the subsequent procedures.

More extensive than the original procedure: The physician manipulates a patient’s ulnar fracture. An x-ray at the follow-up appointment shows that the reduction failed, so the physician completes pinning or an open reduction with internal fixation (ORIF). Code the procedure as needed (with 25545, Open treatment of ulnar shaft fracture, includes internal fixation, when performed, for example) and append modifier 58.

Therapy or treatment following a surgical or diagnostic procedure: This could apply to a soft tissue biopsy followed at a later date by malignant tumor excision.

You’ll only append modifier 58 to the second procedure if it occurs during the first procedure’s global period. The date of the second procedure resets the global period. You should expect 100 percent reimbursement for procedures you file with modifier 58.

Verify ‘Surprise’ Before Reporting 78…

Read More »
Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp

Most Popular: